How to Attach Your DENIMandPATCHES Embroidered Patches
We’re thrilled that you’ve chosen a DENIMandPATCHES embroidered patches to enhance your style! To ensure your patch is securely and beautifully attached to your denim, follow these simple steps:
Attaching Your Iron-On Patch
Materials Needed:
- Iron
– Ironing board or a flat, heat-resistant surface
– Cotton cloth or parchment paper (optional but recommended for added protection)
Steps:
Prep Your Denim: Start by ensuring the area where you’ll attach the patch is clean and dry. If the denim is wrinkled, iron it flat to create a smooth surface.
Position the Patch: Place your DENIMandPATCHES patch in the desired location on your denim. Make sure it’s aligned perfectly.
Cover and Protect: For added protection, place a cotton cloth or parchment paper over the patch. This helps shield both the patch and the denim from direct heat.
Set Your Iron: Heat your iron to the cotton setting, typically around 400°F (204°C). Ensure the steam function is turned off.
Iron the Patch: Press the iron firmly onto the patch for about 30 seconds to 1 minute. Apply steady, even pressure, without moving the iron back and forth. Focus on the edges to ensure they adhere well.
Check Adhesion: Gently lift the cloth or parchment paper to check if the patch is securely attached. If needed, press with the iron for a little longer.
Cool Down: Let the patch cool completely before handling. This allows the adhesive to set properly.
Optional – Extra Security: For added durability, consider sewing around the edges of the patch to keep it firmly in place.
Attaching Your Sew-On Patch
Materials Needed:
- Needle
- Thread (choose a color that matches your patch or denim)
- Scissors
- Fabric marker or chalk (optional, for marking placement)
Steps:
Prepare Your Denim: Ensure the area for the patch is clean and smooth. Iron out any wrinkles if necessary.
Position the Patch: Place the patch where you want it on your denim. If needed, use a fabric marker or chalk to lightly mark the placement.
Secure the Patch: Pin the patch in place with sewing pins to prevent it from shifting while you sew.
Thread Your Needle: Cut a length of thread (about 18 inches) and thread it through the needle. Tie a knot at the end of the thread.
Sew the Patch:
Begin sewing from the backside of the denim, inserting the needle through the edge of the patch.
Use a simple running stitch or backstitch around the edges of the patch for a secure attachment. Make small, even stitches close to the edge.
Sew along any border if the patch has one for a clean finish.
Secure the Thread: Once you’ve sewn around the entire patch, tie a knot on the backside of the denim to secure the thread. Trim any excess thread with scissors.
Final Touches: Remove the pins and ensure the patch is securely attached. Smooth out any wrinkles or bumps.
By following these steps, you’ll have your DENIMandPATCHES patch attached with style and durability. Enjoy enhancing your denim with your new custom touch!